POD injectors for 1992 intercooled D350
#1
POD injectors for 1992 intercooled D350
Want some feedback if you all that know would give me some on the POD injectors. I want these, I am not looking to make a total hotrod here, really want to replace the stock injectors which have over 300,000 miles on them and I hear they can come apart and fall off into the piston area and cause severe problems there. Not sure on that story, but that's what I have heard. I have a 5 speed in this truck and don't want to burn up the overdrive with too much power from the engine, I have heard this will happen if I turn it up too much with the 5 speed manual transmission, yet again, unconfirmed. I know for a fact an automatic can really handle the power of a Cummins 12 Valve turned up all the way stock, cause I have done it on my 1991.5 and had no issues what so ever. I hear and have read I could gain a considerable amount of power from the PODs and mileage too but they will smoke more if I do not stay out of the throttle. So, thoughts?
---AutoMerged DoublePost---
Well, waiting to get some info. and feedback from a couple of sellers and get their opinions as well.
---AutoMerged DoublePost---
Well, waiting to get some info. and feedback from a couple of sellers and get their opinions as well.
Last edited by bladeyamaha; 09-09-2012 at 09:38 AM. Reason: Automerged Doublepost
#3
#4
The Getrag stayed maintained, it always got changed, I'm going to put Royal Purple in it when I get it. I'll look into some 5x12's, thanks for the tip! Thanks. Will look into the 145 injector too.
---AutoMerged DoublePost---
Were you talking about Dodge Cummins Diesel Truck DDP 12 Valve Injectors 275-100HP Nozzles 1989-1993 | eBay
---AutoMerged DoublePost---
Found some 5 x .18's, would that be too much injector for me?
---AutoMerged DoublePost---
Were you talking about Dodge Cummins Diesel Truck DDP 12 Valve Injectors 275-100HP Nozzles 1989-1993 | eBay
---AutoMerged DoublePost---
Found some 5 x .18's, would that be too much injector for me?
Last edited by bladeyamaha; 09-09-2012 at 11:14 PM. Reason: Automerged Doublepost
#6
#7
#9
The following users liked this post:
bladeyamaha (09-11-2012)
#10
OK, finally found a site stating they have the 145 spray angle. Will these work then? 6x.012 425 HP injectors for 1st gen 145 degree spray pattern for IC motor
---AutoMerged DoublePost---
I am remembering the stock Bosche VE Pump will only support 300 horsepower. Is this 300 horsepower number correct or am I remembering wrong? Does that mean the 6 x .012 injectors won't work or the 6 x .012 145 degree spray angle injectors will support up to 425 horsepower and they will work?
---AutoMerged DoublePost---
I am remembering the stock Bosche VE Pump will only support 300 horsepower. Is this 300 horsepower number correct or am I remembering wrong? Does that mean the 6 x .012 injectors won't work or the 6 x .012 145 degree spray angle injectors will support up to 425 horsepower and they will work?
Last edited by bladeyamaha; 09-11-2012 at 08:22 AM. Reason: Automerged Doublepost