12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

main and rod bolts

Old Apr 6, 2012 | 02:58 PM
  #1  
smedley's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2012
Posts: 112
Likes: 1
Default main and rod bolts

Are they reusable?

---AutoMerged DoublePost---

I bought a short block and was going to pull the caps to check the bearings.
 

Last edited by smedley; Apr 6, 2012 at 02:58 PM. Reason: Automerged Doublepost
Reply
Old Apr 6, 2012 | 03:23 PM
  #2  
Dallas Flywheels's Avatar
Diesel Fan
Joined: Apr 2010
Posts: 92
Likes: 6
From: Grand Forks B.C.
Default

YES
 
Reply
Old Apr 6, 2012 | 03:41 PM
  #3  
smedley's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2012
Posts: 112
Likes: 1
Default

Ok thanks
 
Reply
Old Apr 7, 2012 | 09:31 AM
  #4  
94 12valve's Avatar
Diesel Bomber
Joined: Jan 2009
Posts: 3,504
Likes: 157
From: Pylesville, Maryland
Default

I would get yourself a new set
 
Reply
Old Apr 7, 2012 | 10:32 AM
  #5  
smedley's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2012
Posts: 112
Likes: 1
Default

I bought the truck messed up and i don't really want to sink a bunch of money into the engine and something else be messed up. I am going to build the motor I am pulling out so i am trying to get this going right now for as cheap as possible.
 
Reply
Old Apr 7, 2012 | 04:00 PM
  #6  
94 12valve's Avatar
Diesel Bomber
Joined: Jan 2009
Posts: 3,504
Likes: 157
From: Pylesville, Maryland
Default

If you want to do it right than buy new bolts
 
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:56 AM.