I want to make a dual fuel feed for my pump.. how do i go about makin this set up?? any help would be great

 

pull the banjo bolt and go to a hydraulic get a JIC fitting for both ends and get them to make ya a line it'll never wear out...i made mine at work with hydraulic fittings looks pretty sweet...

 

We're do u dual feed from cause as of now there is only an inlet and outlet. Feed and return. Where does the second feed come in

 

the front of the pump

 

Why waste your time the stock pump can't pump any more fuel. install an airdog or a fass and be done with it! imho

 

im going to be putting a airdog on the truck soon and then the dual feed lines so i know that im getting the most fuel i can into that pump..

 

you go through the port on the front of the pump its a 10mm allen i forget the thread count on it and through your stock port if you go to parker hose its around 51st and van buren they have all the stainless hoses and fitting i just put a dual feed and a/d 200 on mine ill see if i can get a picture up it came out pretty clean i think

 

https://www.dieselbombers.com/5-9l-1...ed-p-pump.html