Oil Pre-start for a rebuilt?
#1
Oil Pre-start for a rebuilt?
I have taken my engine all apart, rebuild the turbo, rebuilt the vacuum pump, and modded the fuel pump, along with many other things. All those components were drained of oil when I removed them. When I go to put new oil in this engine,
How much oil should I put in the fuel pump through the oil fill hole and;
I have read to turn the engine over without starting it for the turbo, but could I pour oil in the turbo through the top oil feed line before I bolt it on?
And what should I do for the vacuum pump, it there a way to put oil in it or will it run dry for those few seconds before oil is pumped through by the engine?
How much oil should I put in the fuel pump through the oil fill hole and;
I have read to turn the engine over without starting it for the turbo, but could I pour oil in the turbo through the top oil feed line before I bolt it on?
And what should I do for the vacuum pump, it there a way to put oil in it or will it run dry for those few seconds before oil is pumped through by the engine?
#3
#5
Thread
Thread Starter
Forum
Replies
Last Post
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
makuloco2000
Ford Powerstroke 03-07 6.0L
0
10-27-2014 10:40 PM