Hey everyone. Just got a Garrett airesearch m24 with a 95AR compresser housing and a 96AR turbine housing. Will this work as a twin with my hx52?

 

no clue! but if your manifold is stock i would suggest dremmeling the elbow pipe to match up to the heater grid better, also the final bend on the underside there is a big step on the inside that is super restrictive. and it turns into a cube toward the end. i rounded mine out a little bit and it made a big difference in my mileage. i would be cautious diong this tho you could easily eat into it to much, i stuck a dial caliper in there and measured it out.