12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Speedometer Quit

Thread Tools
 
Search this Thread
 
  #1  
Old 01-15-2008, 09:32 PM
wls's Avatar
wls
wls is offline
Newbie
Thread Starter
Join Date: Oct 2007
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Speedometer Quit

I just picked up a 94 2500 ctd, from a buddy of mine. He told me the speedometer did'nt work so he replaced the sensor on I believe he said the tranfer case, anyways it did'nt fix the problem. Sometimes while driving, say like 60, the meter will bounce up to 100, and might stay for awhile, or not. any ideas for a place for me to check? Thanks
 
  #2  
Old 01-15-2008, 10:02 PM
DodgeRam2500CTD's Avatar
Diesel Enthusiast
Join Date: Mar 2007
Location: Eldon,Mo
Posts: 171
Received 1 Like on 1 Post
Default

Is the Brake/Abs light on?

You may wanna check the Speed Sensor. It is located on the top of the diff. of the rear axle. Mine was acting up so i replaced it and now its good to go.
 
  #3  
Old 01-15-2008, 10:24 PM
wls's Avatar
wls
wls is offline
Newbie
Thread Starter
Join Date: Oct 2007
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by DodgeRam2500CTD
Is the Brake/Abs light on?

You may wanna check the Speed Sensor. It is located on the top of the diff. of the rear axle. Mine was acting up so i replaced it and now its good to go.
I did'nt notice the brake/abs light on, will check for that tomorrow, the 4x4 light is on all the time though. I wonder what sensor he changed on the tranfer case was, I'm sure thats what he said.
 
  #4  
Old 01-21-2008, 01:20 PM
wls's Avatar
wls
wls is offline
Newbie
Thread Starter
Join Date: Oct 2007
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

I replaced the sensor on the rear axle, still no speedo
 
  #5  
Old 02-02-2008, 11:31 AM
dave m's Avatar
Newbie
Join Date: Feb 2008
Location: Ca
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

THe crank position senser CPS is on the block above the damper. It sends pulses to the PCM and without it you get no speedo, alt charging, MIL light, WIF light, etc. It is .050 inch above damper. Try checking the gap and make sure its working.

The CPS is probably working or you'd have other symptoms but just worth looking at. You may have a bad dash gage or wiring issues.
 
  #6  
Old 02-02-2008, 07:21 PM
wls's Avatar
wls
wls is offline
Newbie
Thread Starter
Join Date: Oct 2007
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by dave m
THe crank position senser CPS is on the block above the damper. It sends pulses to the PCM and without it you get no speedo, alt charging, MIL light, WIF light, etc. It is .050 inch above damper. Try checking the gap and make sure its working.

The CPS is probably working or you'd have other symptoms but just worth looking at. You may have a bad dash gage or wiring issues.
I'll check it out, thanks
 
  #7  
Old 02-04-2008, 12:07 AM
94cummins12v's Avatar
Diesel Bomber
Join Date: Jan 2008
Location: Havre mt
Posts: 4,525
Received 103 Likes on 99 Posts
Default

thre reason you 4x4 light is on is pecause your front axle is locked that means you have a vacuum leak or no vacuum at all
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DirtyDiesel58
24 Valve 2nd Gen Dodge Cummins 98.5-02
18
09-27-2015 07:07 AM
Powerstroke36
Ford Powerstroke 99-03 7.3L
2
09-21-2015 08:32 PM
Big Mike 62
1st Generation Dodge Cummins 89-93
0
08-27-2015 08:29 PM
tur370
12 Valve 2nd Gen Dodge Cummins 94-98
1
05-17-2015 04:00 PM
tur370
Dodge Truck and Cummins Turbo Diesel Forum
1
05-14-2015 08:09 PM



Quick Reply: Speedometer Quit



All times are GMT -5. The time now is 06:56 AM.