p pump questions
Thread Starter
|
Diesel Fan
Joined: Jul 2010
Posts: 60
Likes: 2
From: Galveston, Indiana
p pump questions
i just p pumped my gen one and i wanna get a little more fuel too hit without touching the plate, i was told to turn the screw on the diaphram on the back of the pump. i didnt know how far i can turn it and be safe, i have no clue about p pumps, thanks for your imput
---AutoMerged DoublePost---
the diaphram on the afc
---AutoMerged DoublePost---
the diaphram on the afc
Last edited by forgasm; Jul 22, 2011 at 06:05 PM. Reason: Automerged Doublepost
That's for preboost Fuel, basically adds fuel with less boost required down low and more smoke. Still same amount of fuel as b4, just sooner. Won't add any hp, just feels like it since it'll feel stronger down low. Gotta mess with the plater or at the minimum slid it full forward for more fuel.
Thread Starter
|
Diesel Fan
Joined: Jul 2010
Posts: 60
Likes: 2
From: Galveston, Indiana
That's for preboost Fuel, basically adds fuel with less boost required down low and more smoke. Still same amount of fuel as b4, just sooner. Won't add any hp, just feels like it since it'll feel stronger down low. Gotta mess with the plater or at the minimum slid it full forward for more fuel.
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
Jun 24, 2015 08:04 AM
Renteria1217
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
Apr 16, 2015 11:38 PM
B.k. Smith
12 Valve 2nd Gen Dodge Cummins 94-98
10
Jan 7, 2015 02:29 PM
