RPM's too high
#1
RPM's too high
Ok, So I have 4.10 gears and mostly stock engine because I havn't had time after work to open this baby up. It idles about 500 which isn't bad but I have to get around 1800-2000 before the truck will start to pretend to have power. and cruising at about 70mph the RPM's are all the way up at 2800. What can I do to get back into the power range of 1600 when cruising. I want the power and be able to smoke a little but still get gas mileage in the upper teens.
#2
#3
I have a 3 inch body lift kit in the garage but after reading about cutting steering link conectors and some other stuff, i chickened out.
---AutoMerged DoublePost---
Also, my boost is only at 5-10 lbs. In 4th gear I can get 20 if I hammer on it
---AutoMerged DoublePost---
Also, my boost is only at 5-10 lbs. In 4th gear I can get 20 if I hammer on it
Last edited by Dieselfunohio; 02-09-2011 at 05:17 PM. Reason: Automerged Doublepost
#4
Thread
Thread Starter
Forum
Replies
Last Post
john grossman
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
01-12-2019 08:58 PM
Blackdog15
12 Valve 2nd Gen Dodge Cummins 94-98
3
05-20-2015 10:49 PM