reckon ill keep my truck can i reuse my headbolts they havent been retorqued or anything. and wats mod in can do while the head off thats easy and cheap

 

i would replace them.. but if u really are strapped for cash measure them... if there stretched i would not re use them

 

i would never re use headbolts but thats just me, a few guys do and dont have problems.

 

Yep I would not reuse them. They might be the cause of blowing the head gasket or the head is warped? Have you had the head checked to make sure its flat?

 

a shop did the head last time when i was comfortable it was 10 thousands off and i had it shaved 12 thousands. and i found head bolts but i need studs somebody said theres a set someone sells for over 200 and there 12mm

---AutoMerged DoublePost---

also i want to oring it and get all that done any help where to get orings at would be sweet.

 

you shaved the block or head .012"?

 

not me shea loveday did
and it was the head

 

So that head was milled and the gasket blew again?

 

thats what it sounds like ... was the head torqued down right when the new gasket was installed?

 

idk it wasnt a diesel shop that did it and i plugged my wastegate an hour before it blew i may be tradin my 370's for a set of 5x14's and 100 boot