12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Surging Around 1200rpm

Thread Tools
 
Search this Thread
 
  #1  
Old 11-14-2007, 09:18 PM
Monster Truck's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Kingston, WA
Posts: 280
Received 4 Likes on 2 Posts
Default Surging Around 1200rpm

So I picked up my truck today and wow is it awesome. Its really hard to drive but Im getting the hang of it. Ive noticed when Im driving though and Im not sure yet if its me or the truck but this usualy happens when it third it will start surging and give you whiplash. no Im no sure if this is me or the truck as I have not driven it enough yet but to get out of this I either need to mash it or completly let off. Is there something in the pump that can cuase this or is it a 12v thing or do I just need to man of and get some seat time?
 
  #2  
Old 11-15-2007, 09:03 AM
johntf's Avatar
Diesel Fan
Join Date: Aug 2007
Posts: 75
Likes: 0
Received 6 Likes on 6 Posts
Default

The hole story will get better answers , you just got it back , does that mean something was done that your not telling , that may have caused this symptom .
 
  #3  
Old 11-15-2007, 09:15 AM
2001shrtbedcummins's Avatar
Diesel Bomber
Join Date: Mar 2007
Location: Summerfield,Florida
Posts: 3,529
Received 169 Likes on 150 Posts
Default

he just bought it.
 
  #4  
Old 11-15-2007, 11:39 AM
Monster Truck's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Kingston, WA
Posts: 280
Received 4 Likes on 2 Posts
Default

My dad drove it this morning and it didnt happen onece with him so Im thinking its just gotta be me. And Ya I just bought it.
 
  #5  
Old 11-15-2007, 12:27 PM
onewhl750's Avatar
Diesel Fan
Join Date: Oct 2007
Location: Portsmouth Va
Posts: 61
Received 5 Likes on 5 Posts
Default

How much boost are you pulling? I am not sure about a manual, my auto will do it when it locks up and the the boost is more then I am using and it backflows back through the turbo and the air intake. Are you getting any turbo bark when this happens?
 
  #6  
Old 11-15-2007, 07:32 PM
ndurbin's Avatar
Diesel Wrench
Join Date: Mar 2007
Location: Lake City, KS
Posts: 570
Received 63 Likes on 49 Posts
Default

What are the specifics when it happens? RPMs, throttle position, boost, etc.

Your general description will only get ya general answers.
 
The following users liked this post:
Monster Truck (11-16-2007)
  #7  
Old 11-15-2007, 10:44 PM
Monster Truck's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Kingston, WA
Posts: 280
Received 4 Likes on 2 Posts
Default

It usually happens around 1200 and when Im rolling on up to about 1/4 throttle maybe alil past. Not sure on what the boost is when it happens its usually bellow 10psi when im just bogging around. Ive gotten better at driving it and didnt have it happen today and I put down 130 miles today.

This weekend Im going to pull off the afc so I can figure out what plate is in there and what position its in. Im thinking about cuting it to a 0 but I think Im going to wait and see what clutch is in it first I dont want to put down to much power and it feels like its pushing it right now.

---AutoMerged DoublePost---

What kinda boost should I be seeing around town keeping the R's bellow 2k? Ive really gotta work it to get boost up but this is my first diesel with guages and a stick.
 

Last edited by Monster Truck; 11-15-2007 at 10:44 PM. Reason: Automerged Doublepost
  #8  
Old 11-16-2007, 10:58 AM
johntf's Avatar
Diesel Fan
Join Date: Aug 2007
Posts: 75
Likes: 0
Received 6 Likes on 6 Posts
Default

I did not realize you just bought , in my mind , it sounded like you got it back from a shop .
Can you get to the last owner to see what has been done , I'm in similar boat , some mods , but bought from dealer so not sure what was done .
I've read that some want to save a few bucks & put washers under gov. springs ,instead of new springs , its spouse to work , but much harder to tune , more back & forth to get all to work together .
At least some of the possibles are gone with trans upgrade .
 
  #9  
Old 11-16-2007, 08:07 PM
Monster Truck's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Kingston, WA
Posts: 280
Received 4 Likes on 2 Posts
Default

I'am in contact with the previous owner but hes clueless to what exactly is dont becuase the owner before him did the work so Im in the middle of getting ahold of the previous previous owner. I found now that I can drive it when it happens it more a less lopes a little bit rather than surgeing. And when trying to high idle it in the morning right above 1200 it will just want to jump up to like 1600, its pretty much inpossible for me to high idle it at 1500.
 
  #10  
Old 11-16-2007, 08:18 PM
ndurbin's Avatar
Diesel Wrench
Join Date: Mar 2007
Location: Lake City, KS
Posts: 570
Received 63 Likes on 49 Posts
Default

Lopes not uncommon in that RPM range on smaller P-pumps w/ big sticks. Mines horrible b/w 1100 and 1300 RPMs. Bigger DVs are suppose to help the smaller pumps but I haven't gotten around to getting a set for mine.
 
The following users liked this post:
Monster Truck (11-16-2007)


Quick Reply: Surging Around 1200rpm



All times are GMT -5. The time now is 01:04 AM.