Modifying my AFC
#13
#15
The AFC controls the rate at which fuel is delivered, lowering spring pressure will bring the fuel in earlier, as will inceasing the starting position of the off idle adjustment(smoke screw). If you are not altering the rack stop(plate), you will not increase hp or delivered fuel quantity.
#16
#17
Okay I moved the #11 plate all forward. I adjusted the smoke screw to where I'm getting just a haze of smoke until about 6-7 psi.
I adjusted the star wheel as far out as I could and still cannot get even a haze of smoke after 6psi. My boost seems to start slowly climbing at 1500rpm and finally hits 30psi(which is where I set it) at about 2300 rpm. Everything sound right or no?
I adjusted the star wheel as far out as I could and still cannot get even a haze of smoke after 6psi. My boost seems to start slowly climbing at 1500rpm and finally hits 30psi(which is where I set it) at about 2300 rpm. Everything sound right or no?