need help with my speedometer!
Thread Starter
|
Diesel Enthusiast
Joined: Oct 2010
Posts: 100
Likes: 2
From: warwick, md
need help with my speedometer!
ok well i have a 1996 truck BUT my transfer case is out of a 1998 or newer truck (going by the transfer case shift lever) im being told the reason my speedo dont work is because it wont work with this transfer case and i cant find a sensor so is there a way to make this work?
Diesel Bomber
Joined: Jan 2009
Posts: 3,504
Likes: 157
From: Pylesville, Maryland
the speed sensor is driven either off the output shaft of the t case or on the rear axel, sounds like yours cam off the t case. Look on the tailshaft of the case you should see where the speed sensor should mount
Thread Starter
|
Diesel Enthusiast
Joined: Oct 2010
Posts: 100
Likes: 2
From: warwick, md
can i make something up to at least have my speedometer working?
---AutoMerged DoublePost---
ok i just looked at it i didnt see any wires at all coming off the transfer case and i made a mistake i dont see anysensor for my speedometer just chilling under my truck...and on the rear i only seen a sensor dead center on top of the pump...is that it?
---AutoMerged DoublePost---
ok i just looked at it i didnt see any wires at all coming off the transfer case and i made a mistake i dont see anysensor for my speedometer just chilling under my truck...and on the rear i only seen a sensor dead center on top of the pump...is that it?
Last edited by blowinsmoke12v; Oct 22, 2010 at 12:03 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
DirtyDiesel58
24 Valve 2nd Gen Dodge Cummins 98.5-02
18
Sep 27, 2015 07:07 AM
