head shaved 20 thou. 10 thou. gasket, will the valves hit?
#11
marine gaskets were used on marine engines. they have been crossed over for the truck engines. they have heavy fire rings and heavier price and come in different thickness. .020 is what we use. they have a different part number.
---AutoMerged DoublePost---
and we can only get one for the 12v. we cant get any for the 24v. just the normal cummins brand gasket.
---AutoMerged DoublePost---
and we can only get one for the 12v. we cant get any for the 24v. just the normal cummins brand gasket.
Last edited by diesel pap; 09-09-2010 at 03:50 PM. Reason: Automerged Doublepost
#12
Re: head shaved 20 thou. 10 thou. gasket, will the valves hit?
What to you call a heavy price and what is this part number so i can check it out if what you say is true then all the people that walk into cummins and all the guys that buy them from the link above are just getting a normal. .20 gasket
Sent from my DROIDX using Tapatalk
Sent from my DROIDX using Tapatalk
#16
#18
#19
my 5.9 24 valve block has been resurfaced .009" to remove some scratches . will I need a .010" over gasket ? or can i use a std one?
---AutoMerged DoublePost---
my 5.9 24 valve block has been resurfaced .009" to remove some scratches . will I need a .010" over gasket ? or can i use a std one?
1 hr later.
Machine shop just told me he would go oversized if .014" & over.
---AutoMerged DoublePost---
my 5.9 24 valve block has been resurfaced .009" to remove some scratches . will I need a .010" over gasket ? or can i use a std one?
1 hr later.
Machine shop just told me he would go oversized if .014" & over.
Last edited by Norman37; 02-27-2014 at 02:45 PM. Reason: Automerged Doublepost
#20
Thread
Thread Starter
Forum
Replies
Last Post