Fuel pressure readings video.???
ill have to wait to see what mine is when i get the guage in, is the inlet banjo bolt 12mm anyone?
---AutoMerged DoublePost---
when you clamped the line to 30psi at an idle, what was it at wot??
---AutoMerged DoublePost---
when you clamped the line to 30psi at an idle, what was it at wot??
Last edited by dan33klein; Apr 15, 2010 at 08:20 PM. Reason: Automerged Doublepost
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2008
Posts: 195
Likes: 3
From: pa
The top number never really changes just sit at 30psi at idle.
Banjo bolt is unknown at this time. I think it is 14 by 1.5 but not sure...
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
If you have a needle valve you dont need a snubber. slowly close your needle valve until you get a smooth reading and then tighten the packing nut (if you have one). The needle valve should be barely cracked.
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2008
Posts: 195
Likes: 3
From: pa
I just want one so I never run out of numbers on my gauge....
Thread
Thread Starter
Forum
Replies
Last Post
RatsMC
Chevy/GMC 6.2L and 6.5L
19
May 4, 2015 05:25 PM
