12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

egt?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-17-2010, 12:55 PM
wes-cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Dec 2009
Location: wisconsin
Posts: 576
Received 10 Likes on 9 Posts
Default egt?

so i finally installed pyro then moved star wheel FF, smoke screw FF, AFC HOUSING FF,
and i can only hit 900 on the pyro? is there somthing wrong with my pyro or is it because of the bad tranny? tc is no good
 
  #2  
Old 01-17-2010, 01:01 PM
12.valve.hauler's Avatar
Diesel Enthusiast
Join Date: Jul 2009
Location: frankfort, KY
Posts: 213
Received 4 Likes on 4 Posts
Default

bad tc. no load means no real boost and no heat. replace tc and fix tranny and should be able to hit anything ya want
 
  #3  
Old 01-17-2010, 01:06 PM
wes-cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Dec 2009
Location: wisconsin
Posts: 576
Received 10 Likes on 9 Posts
Default

thinking about switching to manual,
 
  #4  
Old 01-17-2010, 01:08 PM
TwinStackPete379's Avatar
Diesel Enthusiast
Join Date: Dec 2008
Location: NorthCentral Indiana
Posts: 411
Received 36 Likes on 20 Posts
Default

[QUOTE=wes-cummins;473478
and i can only hit 900 on the pyro? [/QUOTE]

I wish that was my problem
 
  #5  
Old 01-17-2010, 01:10 PM
wes-cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Dec 2009
Location: wisconsin
Posts: 576
Received 10 Likes on 9 Posts
Default

it just seems like even tho the tranny junk it shuld run more than that cuz she pours coals and goes pretty good

---AutoMerged DoublePost---

ha ha i know, i was worried that she would peg the pyro 2
 

Last edited by wes-cummins; 01-17-2010 at 01:10 PM. Reason: Automerged Doublepost
  #6  
Old 01-17-2010, 01:13 PM
TwinStackPete379's Avatar
Diesel Enthusiast
Join Date: Dec 2008
Location: NorthCentral Indiana
Posts: 411
Received 36 Likes on 20 Posts
Default

My old truck was like that. I did the same mods you have done and i was lucky to smack 900-1000 degrees. and that was pullin a trailer. my trans was not in good shape. Torque converter was in reeeaaalllyyy bad shape. i imagine if i had a good one it would have burried my my pyro. imo
 
  #7  
Old 01-17-2010, 01:20 PM
wes-cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Dec 2009
Location: wisconsin
Posts: 576
Received 10 Likes on 9 Posts
Default

that must be the problem... i mean i realize that im loosing egts and boost with bad tranny but didnt thought egts would be higher

---AutoMerged DoublePost---

how do you like the 191's
 

Last edited by wes-cummins; 01-17-2010 at 01:20 PM. Reason: Automerged Doublepost
  #8  
Old 01-17-2010, 01:32 PM
TwinStackPete379's Avatar
Diesel Enthusiast
Join Date: Dec 2008
Location: NorthCentral Indiana
Posts: 411
Received 36 Likes on 20 Posts
Default

Its a love/hate relationship. . they are great, but i need a turbo. kinda wishing i had smaller ones. makes alot of heat with my set up
 
  #9  
Old 01-17-2010, 04:11 PM
wes-cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Dec 2009
Location: wisconsin
Posts: 576
Received 10 Likes on 9 Posts
Default

so i put a fender washer in the afc,(smoke a little bit excessive on take off) and she hit 1000, but only 30 psi boost. guna tie wast gate and see how she runs
 
  #10  
Old 01-17-2010, 04:37 PM
TwinStackPete379's Avatar
Diesel Enthusiast
Join Date: Dec 2008
Location: NorthCentral Indiana
Posts: 411
Received 36 Likes on 20 Posts
Default

How hott do you want it to run?. the key to tuning is to make as much hp and tq and run as low of egt as possiable. im confused, it sounds like you want it to run hot. 30psi and 1000 degrease is not bad at all. Mine is 30-35 psi and 1500 degrease. I hate it. I didnt see your sig?. have you filled it out?
Sorry if I came off as an A** hole im just confused with what you want as far as egts go. Remeber: the further you turn it up the faster your trans will go
 

Last edited by TwinStackPete379; 01-17-2010 at 04:43 PM.


Quick Reply: egt?



All times are GMT -5. The time now is 03:30 AM.