Clutch Replacement
#1
Clutch Replacement
last night i pulled my tranny out so i can put my new clutch in. i was able to pull that tranny out withh nothing but 2 ratchet straps an my hands. i pulled the tcase off an dboth drivelined. i left the cross member in. i unbolted the 4 bolts that hold the tranny to the bell housing and slid the tranny back 14 inches resting it on the cross member using the ratchet straps as a cradal
#2
last night i pulled my tranny out so i can put my new clutch in. i was able to pull that tranny out withh nothing but 2 ratchet straps an my hands. i pulled the tcase off an dboth drivelined. i left the cross member in. i unbolted the 4 bolts that hold the tranny to the bell housing and slid the tranny back 14 inches resting it on the cross member using the ratchet straps as a cradal
I just have one question ... why?
I'm a firm beleiver of the "work smarter not harder" saying and here is my advice to ya ... Go to wal mart buy a cheep floor jack, and drop the cross member and slide it out like your suposed to. It will make life way easyer when you try to put the trans back in.
#5
#6
#8
#9
I just told you how to do it the easy way ... after I take the drive shafts off it takes under 10 min to get the cross member off
#10