finally got my afc spring that i have been waiting for to complete the 3GSK job since i had it all apart. got her all back together and took it for a drive and WOW what a difference!!!!!! only question would be is where is the idle adjustment? want to turn her down a little as it idles a little high.

 

Ram Diesel Problems

 

You did pull all of the shims out correct and set the stud protrusion the same or close right?

 

yes i did. truck runs great, just idles a little high. around 1000rpm but i expected that it would idle high. was at 850 before and i set the springs at .050" so just going to adjust the idle. i checked my measurement 4 times to make sure they were the same.

 

Follow what Dave0 posted and you should be good to go then.

 

yep that was the trick. idles fine now. thanks alot guys!!!!!!!