injection pump problem help me
#1
injection pump problem help me
ok so there is a thin black line that runs off the back side of the afc and has a 90 degree brass elbow that runs to the cylender head.i was tryin to take it all offand i broke the 90 degree piece off in the cylinder headi noticed a badass boost leak i threaded the rest of the brass peice and put a screw in there to block the hole,but what should i do to get it back to normal,has this happend to anyone else please help me
#5
#6
#7
#8
#9
All I can say is.. good luck with an easy out without taking the fuel lines off.. I remember messing with it - the easy out wouldnt work because there isn't much room. Anyway... whenever you go to get some LC DV's, use an easy out then, that way the injector lines will be out of the way. Wish I was there to help you out .