12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

lag

Thread Tools
 
Search this Thread
 
  #1  
Old 10-02-2009, 04:20 PM
12valvetater's Avatar
Diesel Bomber
Thread Starter
Join Date: Oct 2008
Location: Pennsylvania
Posts: 1,474
Received 35 Likes on 34 Posts
Default lag

my truck was super smokey with no fuel plate so i took the plug out of the afc and the starwheel was all the way back and the spring loose as can be i tightened it up thinking it would help the lag it dropped the smoke way down it just hazes now which is fine with me but i think it made the lag worse i want to get the best fuel mileage/ driveability i can having it lag every time i shift is annoying
 
  #2  
Old 10-02-2009, 05:16 PM
xzaq103's Avatar
FormerVendor
Join Date: Jun 2007
Location: Fayetteville AR
Posts: 3,196
Received 136 Likes on 121 Posts
Default

What plate were you running?
 
  #3  
Old 10-02-2009, 05:21 PM
94 12valve's Avatar
Diesel Bomber
Join Date: Jan 2009
Location: Pylesville, Maryland
Posts: 3,504
Received 157 Likes on 142 Posts
Default

lag on the stock turbo? if so you are fueled way to much down low. have you modded the afc? and what is your timing set at?
 
  #4  
Old 10-02-2009, 11:10 PM
12valvetater's Avatar
Diesel Bomber
Thread Starter
Join Date: Oct 2008
Location: Pennsylvania
Posts: 1,474
Received 35 Likes on 34 Posts
Default

i dont know what my timing is at some where around 13.5-14 but i havent had the truck timed to know exactly it breaks up when i floor it with no load so i know it needs more i havent done anything to the afc and the plate that was in it before was a #4 but i pulled it after i did my rebuild it also kind of feels like the pedal is hanging up until the rpms come up to about 2K it has stock injectors i dont think im fueling that hard down low because it just hazes a little
 
  #5  
Old 10-02-2009, 11:11 PM
94cummins's Avatar
Diesel Fan
Join Date: Sep 2009
Location: Mille Lacs Lake MN
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

get new injectors
 
  #6  
Old 10-03-2009, 01:49 AM
12valvetater's Avatar
Diesel Bomber
Thread Starter
Join Date: Oct 2008
Location: Pennsylvania
Posts: 1,474
Received 35 Likes on 34 Posts
Default

mine are fine
 
  #7  
Old 10-03-2009, 10:56 AM
94 12valve's Avatar
Diesel Bomber
Join Date: Jan 2009
Location: Pylesville, Maryland
Posts: 3,504
Received 157 Likes on 142 Posts
Default

what do you mean by hanging up? and is the turbo housing the stock 12cm or was it changed?
 
  #8  
Old 10-03-2009, 04:50 PM
12valvetater's Avatar
Diesel Bomber
Thread Starter
Join Date: Oct 2008
Location: Pennsylvania
Posts: 1,474
Received 35 Likes on 34 Posts
Default

its the stock turbo housing. as far as what i said about hanging up when i push the accelerator it goes about 1/3 of the way down with light pressure and then it feel like i hit a wall and its harder to push past there untill the rpms come up to about 2k you can push the pedal past this point if the rpms are slower than that but it doesnt make any difference in power until rpms come up. could my governor springs be no adjusted quite right?
 
  #9  
Old 10-03-2009, 09:14 PM
lodal cummins's Avatar
Diesel Enthusiast
Join Date: Aug 2009
Location: portland oregon
Posts: 462
Received 18 Likes on 17 Posts
Default

does your boost line have a break in it? i would check that and put the plug back in and see it there is any difference. sounds like the rack travel is hanging up on something or not moving the way it should. try playing with the starwheel some and the boost screw on the back of the afc housing.
 
  #10  
Old 10-03-2009, 09:28 PM
beave's Avatar
Diesel Fan
Join Date: Sep 2009
Location: State of Jefferson
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

what springs do you have in it?
 


Quick Reply: lag



All times are GMT -5. The time now is 05:56 AM.