When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i used a bolt out of the intake horn it uses a 10mm wrench you pull the oil fill tube and screw the bolt unto the gear after you take the pump gear nut off. i built by own puller out of 2 bolts and some agle iron
Buy a timing set and do it right. The timing set should come with the dv socket and a gear puller. There is no need to be replacing a HG cause you ran 35* of timing.