12v to 24v block
#1
#4
#6
The reason the pistons wont work is the 24v piston are a centered bowl and the 12v are offset. Thats not all that won't work. If you were using the 12v short block i.e. block pistons, crank, rods and cam. The 12v cam will not work with the 24v valve train. There are different rocker ratios between the two. It may work but you will hinder performance.
On another note... the 24v p7100 line can be made by using the stock 24v line and re-bending them. This is what I did and saved around $600 bucks. But, its crucial you are careful and take your time when bending them.
On another note... the 24v p7100 line can be made by using the stock 24v line and re-bending them. This is what I did and saved around $600 bucks. But, its crucial you are careful and take your time when bending them.
Thread
Thread Starter
Forum
Replies
Last Post
Dayt the great
12 Valve 2nd Gen Dodge Cummins 94-98
5
08-16-2015 07:42 PM
Dayt the great
12 Valve 2nd Gen Dodge Cummins 94-98
2
07-22-2015 01:23 PM
Diesel Bombers
Latest Automotive Industry News
0
10-08-2014 11:50 AM