I need to know how to plug my wastegate line? and what it will do to my performance? and if i install a BD performance elbow can it still be plugged or is that the same thing

 

If you have a boost elbow on your turbo housing this will do what u want it to do. Its totally adjustable on psi and its cheap and I have one and love it! Adjustable Boost Elbow But I wouldn't totally disable the wastegate. Too much boost is not good for the turbo or motor. I wouldn't go any higher than 37 to 40 psi.

 

Ya, what he said. but your not doing any good pushing a stock turbo over 35psi and i wouldnt feel comfertable pushing a stock hg over 30psi. but some people have and had no issues. its all up to you and how much money you have if you do have a head gasket fail.

 

so do you know how to plug it though

 

take the line off and put a bolt in it.....

 

where is the line.? is it the one on the bottom of the turbo?

 

yes

 

we plugged the end that T's into the wastegate, is that right? cuz i felt no power gain possibly even a loss

 

make sure you have the one that goes from the "t" on the turbo to the wastegate.do you have a boost gauge?how many pounds are you pushing.you could have leaks in your system.http://https://www.dieselbombers.com...tructions.html

 

ya it wouldn't suprise me if i was leaking because the line was very old and corroded... ya it was the right one, and i even checked it while running and when i unplugged it and hit the gas there was air spewing out the hole, so then i plugged it again and still notice no difference... no i dont have gauges