Delayed OD & TC shifting
#1
Delayed OD & TC shifting
Still trying to diagnose the transmission shifting (OD & TC).
There seems to be no rhyme or reason as to when the transmission decides to shift into OD. Sometimes @ 35mph, sometimes @ 45 and other times @ 50 mph. Sometimes if I let off the throttle completely, it will shift into OD. Once in OD it stays. I installed two LEDs that register the ground signals from the PCM for OD and TC lockup and they both light up when driving OD 1st and TC later. I contacted DTT (I have their valve body installed) and was told to adjust the TPS to 0.9vdc and it still acts the same (replaced the TPS approx 10K ago). I have installed the DTT noise filter with no change. Just had the transmission serviced with no difference.
Any other ideas? I'm going crazy.
Mike
1996 2500HD w/47RE
There seems to be no rhyme or reason as to when the transmission decides to shift into OD. Sometimes @ 35mph, sometimes @ 45 and other times @ 50 mph. Sometimes if I let off the throttle completely, it will shift into OD. Once in OD it stays. I installed two LEDs that register the ground signals from the PCM for OD and TC lockup and they both light up when driving OD 1st and TC later. I contacted DTT (I have their valve body installed) and was told to adjust the TPS to 0.9vdc and it still acts the same (replaced the TPS approx 10K ago). I have installed the DTT noise filter with no change. Just had the transmission serviced with no difference.
Any other ideas? I'm going crazy.
Mike
1996 2500HD w/47RE
#2
#3
Thread
Thread Starter
Forum
Replies
Last Post
metrickjb
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
01-21-2015 04:16 AM
Canadiancummins93
1st Generation Dodge Cummins 89-93
8
12-10-2014 09:03 PM