High EGTS HELP
#21
Yup, I have a 215 w/887 and a HX35W .... i can peg my auto meter pyro out ... with out the plate in ... but only on lock up on a hard pull .... hence the leaking HG...
So that being said ... I think your guage, is obviously a problem ... when your pulling does your coolant get hott real quick ? or quicker than you would expect ?
I cant rember if you said you have or not but ... might wanna blow out the Rad. core and CAC core just for good measure - what you cant see could be the issue
So that being said ... I think your guage, is obviously a problem ... when your pulling does your coolant get hott real quick ? or quicker than you would expect ?
I cant rember if you said you have or not but ... might wanna blow out the Rad. core and CAC core just for good measure - what you cant see could be the issue
#22
i have autometer z series gauges. They are good gauges. the probe is pre-turbo as well.
---AutoMerged DoublePost---
here is a question for you guys. i want to do ARP head studs. I havent blown my head gasket but its something i just want to do. Do i replace the head gasket and what brand head gasket and do i have get anything milled?
---AutoMerged DoublePost---
here is a question for you guys. i want to do ARP head studs. I havent blown my head gasket but its something i just want to do. Do i replace the head gasket and what brand head gasket and do i have get anything milled?
Last edited by Big black; 10-07-2013 at 08:54 AM. Reason: Automerged Doublepost
#24
#25
so i called autometer and told them about my EGT problem thinking its my gauge. so they gave me a test to do and apparently my gauge is out of calibration so i have to send them my gauge for them to calibrate and check over and make sure there is no problems. I dont know how it could be that off calibration but i guess i will find out. I am also advanceing the timeing today to 16*. hopefully all goes well
Thread
Thread Starter
Forum
Replies
Last Post