no low end power
#11
Does it go compleatly threw the rpm range? My heater grid got stuck on and melted the sm, hose that goes from the intake to the afc, I could go 23mph max! So if you can rev out in gear, just low on power I think that is not the issue. But I do think the arm is not traveling on the plate correctly, or stuck! I stumbled across a VERY helpful utube video explaining in detail everything about the bosh p7100! Surch for something along the lines of "how does a p7100 work" I'm sure you can find it! If I remember correctly there is 2 screws on the back, fire wall side of the pump, with the afc off turn the screws one or the other and it raises or lowers the arm ware it touches the plate. That's all I've got 4 u
#12
Bought truck with no plate. Did the common afc mods and threw a #100 in. Wasn't impressed. I took it back out and now the truck is not getting as much fuel as before. No smoke at all is how I can tell. I thought no plate ment more low end fuel. Star wheel is all the way loose now to see what's the deal. Still nothing.
#13
Bought truck with no plate. Did the common afc mods and threw a #100 in. Wasn't impressed. I took it back out and now the truck is not getting as much fuel as before. No smoke at all is how I can tell. I thought no plate ment more low end fuel. Star wheel is all the way loose now to see what's the deal. Still nothing.
don't worry about checking it, I have no clue what I am talking about.
Thread
Thread Starter
Forum
Replies
Last Post
fivepointohno
5.9L CR Performance
12
01-25-2016 01:07 PM
1ATony
1A Auto Parts
1
10-29-2015 02:11 PM
Josh Chretien
5.9L 12V Performance
5
03-01-2015 06:00 AM
chuffysplace
5.9L 24V Performance
2
12-20-2014 11:22 PM