My buddy's is a marine mechanic and he has one he said its a bitch to do but I'm gonna try it this weekend and see what it has absolutely nothing comes out the crank case tube I get a little warm air that's all and no oil drips out of the crank just the dip stick

 

You really got my attention now! Im pretty much stumped...

 

Yea I don't get it I took the tube of and there's no oil around the vent. And my oil level is actuly 2 quarts low so it's not makeing oil it's just makeing a huge mess on my drive way and the truck

 

You could try putting a new oring on the dipstick yet maybe there's a rip in the old rubber piece in there.

 

i put a new gasket on dip stick and it still leaks. but when i take the fill cap off steam comes out and no oil blows out of the dipstick when thats off. i put my hand over the oil fill and i cant feel any kind of pressure pushing on my hand or blowing it off. when the cap is off it sounds like metal hitting metal in there i don't know what it is. so i put a universal filter from auto zone on it and it dosn't seem to leak. so can i put performance mods on this motor or will i b wasting my time?

 

genosgarage.com sells a dipstick for your engine, because i bought one from them for 30 dollars i think it was. Just type "dipstick" in the search engine on their website and they will have it. One thing that i did until i got a new one, get a couple zipties and a rubber band to hold that thing firmly down on there.

 

I got a new dip stick I ring and it is still leaking. I put a breather off a 350 over the oil fill. But what about mod to this motor I have another one but I think sealing them wills a pain in the butt. But what are anyone's thoughts on swapping it out? Or just putting performance parts on the motor in the truck?? Help!!

 

its probably leaking out the dipstick because the baffle in the tappet cover is clogged. You said when it is cold a little steam comes out of the down draft hose and when its warm nothing... I would confirm that this is true and then replace or clean your tappet cover baffle. I have an extra

 

I had an engine that over heated and had a slap to it.swaped it and now my engine does the same blows the dip stick tube off it is not blow by. don't be concerned blow by tube under on the starter side will blow out before the dip stick tube just find a rubber O ring that will work thats what i did