Fuel line/filter question need help!
#1
Fuel line/filter question need help!
Hey everyone new to this site, I am building a 1995 12v from the ground up and need some help with fuel delivery, planning on running a bdf sump to a napa 4770 filter base with a wix 33005Filter (12-15 gph) 2micron nominal, all hydraulic lines with proper fittings to stock lift pump. Question is will the filter let enough fuel to flow? And can the stock lift pump pull it though without strain? Do I still need to use the stock filter? In very cold climate temp goes to -35 during winter months any help will be appreatiated! Thanks in advance.
---AutoMerged DoublePost---
Anyone?
---AutoMerged DoublePost---
Anyone?
Last edited by Wallyt; 10-26-2012 at 07:57 PM. Reason: Automerged Doublepost
#2
Why don't you upgrade to 1/2 lines and use a remote mount fuel filter and water separator? Put the filters before the Lift Pump to reduce restriction after LP. Or you can get a raptor 100 kit and use the stock filter location. Or use and airdog or fass system that includes LP, lines, and filters in one setup. There are several ways to go about it.
Last edited by H.R.D; 10-26-2012 at 09:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM
cummins Pride
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
10-06-2014 11:28 AM