idle steady climbing
#1
idle steady climbing
truck was running great didnt start it for about 2 weeks came back and truck would not start found that the selonoid was stuck in the down postion moved it by hand and it started and then worked on its own but the idle is just steading climbing when it starts. so not sure what could be the problem. I only let it get to about 1500rpm before I shut it off.
stats on the truck is- 4k, 18* timing, air dog, hamilton cam, s480 under a hx35, 5x14 cpp injectors
update- checked for a stuck rack and that turned out to be working fine it was warm a few weeks ago when i started it 85 degrees today it is cold 61 outside. think it could be somthing to do with that
---AutoMerged DoublePost---
so it seems some how the cruise control linkage got caught up with the accelerator linkage. un hook all linkage and runs like a champ again!
stats on the truck is- 4k, 18* timing, air dog, hamilton cam, s480 under a hx35, 5x14 cpp injectors
update- checked for a stuck rack and that turned out to be working fine it was warm a few weeks ago when i started it 85 degrees today it is cold 61 outside. think it could be somthing to do with that
---AutoMerged DoublePost---
so it seems some how the cruise control linkage got caught up with the accelerator linkage. un hook all linkage and runs like a champ again!
Last edited by fivepointohno; 10-08-2012 at 10:04 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
JoeyMiR
24 Valve 2nd Gen Dodge Cummins 98.5-02
9
02-03-2018 10:05 PM