idle steady climbing
 

truck was running great didnt start it for about 2 weeks came back and truck would not start found that the selonoid was stuck in the down postion moved it by hand and it started and then worked on its own but the idle is just steading climbing when it starts. so not sure what could be the problem. I only let it get to about 1500rpm before I shut it off.

stats on the truck is- 4k, 18* timing, air dog, hamilton cam, s480 under a hx35, 5x14 cpp injectors


update- checked for a stuck rack and that turned out to be working fine it was warm a few weeks ago when i started it 85 degrees today it is cold 61 outside. think it could be somthing to do with that

---AutoMerged DoublePost---

so it seems some how the cruise control linkage got caught up with the accelerator linkage. un hook all linkage and runs like a champ again!

How tight are the 4Ks?