Does anyone have instruction on how to, and the best place to get parts, for a home made, do it yourself, METHANOL/WATER INJECTION. -

AlCorr's Sig:

04.5, 2500, Flame Red "Dragon", SLT, QC, 2/WD, 48RE, 4:10, Quadzilla Commander, Xzillaraider 2 XZT, Rokk timing sensor, Banks High Ram Intake, Mechanical Oil Pressure Gauge, BD Auxiliary Lift Pump, AEM Brute Force w/Amsoil EAAU4090, Aero-Turbine 4040L, Navigation Sym, Firestone Air Bag, Hellwig Sway Bar, Spray/Liner, Factory SRT-10 Hood, Mag-Hytec Diff. & Tran. Titanium 5er

hmmm.... Maybe you should have a mod move this into the general DIesel Section. I know alot of guys build there own setup so they should chime in. -

RSWORDS's Sig:

Want To Win A Free Nintendo Wii and get Some New Tools?
Click Here --> http://www.dieselbombers.com/tool-su...-specials.html

Real engines only have freeze plugs

Fire Engine Red

'06 CTD 4x4 Sport w/ Auto
-Silencer Ring MIA
-Gutted Torque Tube
-Free 4" Turbo Back Siverline Exhaust w/ a 5" Tip Thanks to a BOMBARDIER give away here at Diesel Bombers!!!
-Guages thanks to www.VulcanPerformance.com
-SMARTY tuner set up on SW#5
-389.9/1072.1 on a Mustang Dyno

Competition White

'89 CTD 4x4 LE w/ Auto Pulling Truck
-BHAF
-Guages thanks to http://www.lnperformanceparts.com
-POD Injectors
-Injection Pump Tweaks
-H1C/H1E Hybrid
-Adjustable Suspension Stops Thanks to GO OVRIT
-DennyT Stage II Fuel Pin
-Bad Ass Dump Bed and Cop Light

I have a source for Shurflo pumps right across the street from me, but they want over $200 for a 150 PSI pump; the best places to get a pump from are Devil's Own, Cooling Mist or Snow, for around $115-150.

The best nozzles are $20 diffuser nozzles available from McMaster-Carr; way better than the stuff the waterjection companies sell for the same price.

The best DIY controller is the "SMART DMS" from Cooling Mist; computer programmable datalogger/ multi-dimensional control unit for $200, capable of way more than the standalone controllers other companies sell for way more. You can get pressure transducers and temperature transducers for it off of eBay for a few Jacksons apiece.

The best solenoids I've found are from Cooling Mist for $40 a piece; I haven't found any other sources for them for any cheaper.

That's all assuming you don't want to build a real big-boy 1000 PSI injection system out of nitrous solenoids and a pressure washer.

1stGen.org :: View topic - Begle's Water Injection -

Begle1's Sig:

1990 D-250 Regular Cab: Full power screw; stout TC and A518 w/ manual valve body; ratchet shifter; piston LP; Ramcharger tank; manual off; computer-programmable 40 GPH water/meth fumigation; gauges