Looking for a turbine (hot side) housing for a Holset HX35.

Needs to be twin scroll (divided) T3 mount.

Needs to be internally wastegated functioning properly. Don't need the exhaust plate, elbow, etc. just the actual turbine housing.

For reference here's the Holset numbers for the housing I need to replace:

3532214
01

E4
16 backwards E

Also, if it interests anyone, I have this exact housing already but the wastegate puck and wastegate arm hole are already welded shut for running an external wastegate/blowoff. Willing to trade or whatever -it's useless to me.
Thanks in advance.
Mike

 

I'm pretty sure I have a 12cm off my HX35 at home. It is fully functional, I removed it to install a 16cm housing. I'll look for it tonight, and send pictures if I find it.

 

Many thanks! Hope it's the right one...

 

Should be, it's a standard HX35 12cm housing, that fits a stock application.

 

Sounds good. The only tweak is my HX35 is a "G" - has the coolant and oil supplied center section. But that shouldn't matter