![]() |
you only need 1. I loaded and unloaded the suspension many times and the bars don't load up until the axel tries to wrap
|
how is ur driveshaft loop connected so it'll move with the driveshaft?
|
3 Attachment(s)
Attachment 45737
the t case side has a solid mount and the upside down bolts allow the loop to slide foward and backward on the rear. ---AutoMerged DoublePost--- here is the solid front mount Attachment 45738 Top view Attachment 45739 |
thats a pretty slick setup on the driveshaft loop
|
it works very well:tu:
My first hook after I built them I broke 2 u joints :scare2:. Thankfully I put them on when I did, that could have been very bad |
Idk if ill go thru the work of making mine all 1 piece. Ill probably do the t case part like u did and have a separate 1 for at the diff
|
thats up to you, I made it so I can get the driveshaft out with the top half still in place. I have to unbolt 12 1/2 bolts and the bottom will fall right out.
|
Yeah I just don't c how it doesn't bind up. I think I wanna slightly modify ur design
|
cool deal! its always good to see what you can come up with:tu:
|
All times are GMT -5. The time now is 11:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands