How Many Pullers Do We Have?
Diesel Enthusiast
Joined: Mar 2007
Posts: 118
Likes: 28
Truck needs a front locker, new clutch, lowered, hanging weight rack, single stack, new bumper, some body work, and valve springs to get ready for next season...when next season rolls around I should have a better package and maybe I can pick up a sponsor...but I live in an area that diesel pulling is still small...all local trucks, not too many sponsored modified trucks.
BTW you can get sponsors in any class it doesn't have to be modified class only, your selling advertising 300' at a time no mater what class.
BBD
---AutoMerged DoublePost---
Doing good, some small issue on my part in the begining but I like to think I got progressivily better this season
totally different on these tracks so I didn't do any tuning this summer, but have some plans for this winter.BBD
Last edited by BBD; Oct 12, 2007 at 11:06 PM. Reason: Automerged Doublepost
Diesel Enthusiast
Joined: May 2007
Posts: 103
Likes: 2
From: Southern Indiana
PULL
Got to go to 5 pulls this summer
1) Burlinton KY OPEN class- got 17th out of 27.. One of 4 trucks with a stock turbo!!
2) North Vernon,IN Open Class Got 4th, Top three trucks were 2.8 trucks
3) Rushville,IN 3rd out of 16 in the stock turbo class... also pulled in the 2.8 class and took 3rd out of 8..
4) Osgood,IN ?? never did find out.. Not in the $$
5) Allensville,IN stock turbo class-- 1st place
Not to bad for a reg. cab at 6600lbs w/out weights
1) Burlinton KY OPEN class- got 17th out of 27.. One of 4 trucks with a stock turbo!!
2) North Vernon,IN Open Class Got 4th, Top three trucks were 2.8 trucks
3) Rushville,IN 3rd out of 16 in the stock turbo class... also pulled in the 2.8 class and took 3rd out of 8..
4) Osgood,IN ?? never did find out.. Not in the $$
5) Allensville,IN stock turbo class-- 1st place
Not to bad for a reg. cab at 6600lbs w/out weights
Diesel Fan
Joined: Mar 2007
Posts: 92
Likes: 2
From: JACKSON, MI
pulled quite a bit this summer and didnt do to bad actually one first place and a 2nd place then a handfull of 4th places and the rest vary.
Amber (girlfriend) pulled in Zanesville. I told her not to touch the brakes at all
and once the truck started to dig a little she freaked out and let off the go pedal. white knuckle and bulging eyes the whole time! she was very nervous but I was proud
(2nd place)
Amber (girlfriend) pulled in Zanesville. I told her not to touch the brakes at all
and once the truck started to dig a little she freaked out and let off the go pedal. white knuckle and bulging eyes the whole time! she was very nervous but I was proud(2nd place)
two 2nd places a 7th then a 12th out of 18, then pull couple dozen time in my back yard ( used the clubs sled and my dad's track) nice to have a sled handy
Diesel Bomber
Joined: Aug 2007
Posts: 6,157
Likes: 371
From: TIKRIT, IRAQ
i spend too much money going to, officiating, advertising, and rewriting and revising rules to even want to build a truck, i do got a line on some parts to build a very nasty truck, found a set of militaries with t-case, a allison 5 speed auto and two 6V53 detroits, think i can hook them crank to crank?.......oh and all that is costing me a 1000 bucks....
Diesel Wrench
Joined: Mar 2007
Posts: 774
Likes: 17
From: Capistrano Beach, CA
I have never pulled with my truck before, though I find spectating quite fun. If i had a backup car I would be all about hookin up, though seeing as how my truck is a DD I am a wuss and yeah....
Oh, and as far as pulling anything else, I pulled a old MF tractor in 2wd, and an older F250 gasser... For ***** and giggles of course...
Oh, and as far as pulling anything else, I pulled a old MF tractor in 2wd, and an older F250 gasser... For ***** and giggles of course...
Diesel Fan
Joined: Jun 2007
Posts: 12
Likes: 1
i spend too much money going to, officiating, advertising, and rewriting and revising rules to even want to build a truck, i do got a line on some parts to build a very nasty truck, found a set of militaries with t-case, a allison 5 speed auto and two 6V53 detroits, think i can hook them crank to crank?.......oh and all that is costing me a 1000 bucks....
I know you can!
