Tire, Wheel & Suspension Discussions Based on Tire, Wheel & Suspension Set Ups Including Lift Kits , Lowering , Rims , Tires , Offsets and More

Factory block differences?

Thread Tools
 
Search this Thread
 
Old Aug 7, 2011 | 03:00 PM
  #11  
SuperDave4x4's Avatar
Diesel Enthusiast
Joined: Mar 2007
Posts: 135
Likes: 3
From: Athens, Georgia
Default

Originally Posted by J-Pipes
Got my truck lowered down today, factory coils in the front, and went from a 4-5/8 factory block to a 2" block in the rear. Try to post a pic, has 285/75/16 tires on stock wheels.

Sent from my PC36100 using Tapatalk
Looks good!!

Can you get some measurements for me? Im trying to have a custom coil made, but I don't know if or how much my stock coils are currently sagging. I want to compare yours to mine.

If you can or have time measure from the ground to the center of the front fender with the tape measure aligned with the axle.

My truck with the stock springs and NO coil spring isolator measures 39".

Also my tires measure 31.2"

This would be a HUGE help!!
 
Reply
Old Aug 7, 2011 | 10:39 PM
  #12  
J-Pipes's Avatar
Thread Starter
|
Diesel Wrench
Joined: Apr 2009
Posts: 562
Likes: 34
From: Brownsville, Oh
Default Re: Factory block differences?

Try to get a measurement for you tomorrow. And yep just as I thought, rear end was a little low today! I would guess the gross trailer weight was around 10k.

If you want to see what's in the trailer, check out WWW.scottsrodsandracefab.com. had the car called PePe in this yr, got to haul Mr. Fab last yr.

Sent from my PC36100 using Tapatalk
 
Reply
Old Aug 7, 2011 | 11:13 PM
  #13  
Red_Rattler's Avatar
High Tech Redneck

Joined: Nov 2007
Posts: 6,730
Likes: 496
From: Columbus WI
Default

TSB 02-001-01
 
Reply
Old Aug 8, 2011 | 12:43 PM
  #14  
SuperDave4x4's Avatar
Diesel Enthusiast
Joined: Mar 2007
Posts: 135
Likes: 3
From: Athens, Georgia
Default

Thanks J-pipes, that will be a huge help.
 
Reply
Old Aug 8, 2011 | 06:05 PM
  #15  
J-Pipes's Avatar
Thread Starter
|
Diesel Wrench
Joined: Apr 2009
Posts: 562
Likes: 34
From: Brownsville, Oh
Default Re: Factory block differences?

Got it measured, it was pretty much right at 40", but its a gravel driveway, so it may not be exact, oh the 285 tires are just under 33".

Sent from my PC36100 using Tapatalk
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Slim Whitey
12 Valve 2nd Gen Dodge Cummins 94-98
0
Nov 8, 2014 09:41 PM
CumminsCrazed
5.9L 24V Performance
0
Oct 12, 2014 03:15 PM




All times are GMT -5. The time now is 09:22 AM.