1st gen 2wd cummins control arm?
#1
1st gen 2wd cummins control arm?
I was redoing my ball joints. they are the press in kind and I noticed I was replecing replacement ball joints and my new ball joint didn't take much force to press in so I need new upper control arms. Does anyone have any Idea where to get them? I can't find them at the parts store and i cant find them online. Also I took all my tie rods off and now im not sure wich set (inner and outer) goes on which side, how do i tell them apart?
#2
Moog part numbers for D series are:
upper control arm shaft kit K7036
upper control arm bushing kit K7006(2 required per truck),
upper control arm bumpstop K7293
I thought most of the tie rod part numbers were marked L and R. OReilly, Advance Auto, NAPA should be able to cross reference the Moog numbers.
right outside tierod ES3122R
right inside tierod ES3123L
left inside tierod ES3123L
left outside tierod ES3122R
For S&Gs are the service manual pages for you.
Good luck!
upper control arm shaft kit K7036
upper control arm bushing kit K7006(2 required per truck),
upper control arm bumpstop K7293
I thought most of the tie rod part numbers were marked L and R. OReilly, Advance Auto, NAPA should be able to cross reference the Moog numbers.
right outside tierod ES3122R
right inside tierod ES3123L
left inside tierod ES3123L
left outside tierod ES3122R
For S&Gs are the service manual pages for you.
Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
Cdog121
1st Generation Dodge Cummins 89-93
6
11-16-2015 01:49 PM