Lowering my 03 dodge 4x4 to the ground
Has anyone done this? If so how do I attack this
|
First step would be remove any blocks from the rear axle, after that you're gonna have to get custom springs front and rear depending on how low you want to go. I don't think there is much room for the axle on the front to go much lower and still have any travel though.
|
didn't someone post up a dodge with crazy low airbags at somepoint. but that might have been a two wheeler. i don't know much about going down, i usually go up.
|
How much lower can the front go ?
|
Just move to Mexico and get it over with, idiot. :td:
|
I think you could put half ton springs in the front.But i'm not exactly sure do some research online i had say a guy in one of my diesel power mags that had half ton springs.
|
why dont you just get a2wheel drive they make 4x4's for a reason:moon::ouch:
|
I took the blocks out of the rear, and kept the 1500 springs in the front of mine. I am waiting until I get the engine put back together so I can see exactly how the will front sit and I'll adjust the rear up or down to level it.
|
You can heat the springs a little at a time. That, or trade it for a "vato" outfit and a chrome bicycle with a velvet seat.
|
well i think its safe to say, this guy aint coming back here again
|
All times are GMT -5. The time now is 12:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands