want pictures of dc-1 wheels
#12
305-70-16 , and I had to remove the mud flaps ,, I lifted the front to try to clear the flaps but it accuallly make it worst , So i went with fender flairs also had to replace ball joints 1 month after install , The off set is hard on them and loves to stick the tire out side the body Just FYI and exspect some handling lost compaired to Stock ,, All This should be exspected with any Larger After Market Rim and tire set up , ITs either going to look good or drive good IMO
DM
DM
#15
I Lost some of my handling and ride Hints the $700 KORE Front Suspension it gave me a good bit back but its not as good as stock , If you go with a larger tire its going to happen your going to lose some handling and create some added stress in places it wasnt before , I was willing to do it ...LOL Just giving a fair warning Im sure others can add there POV's
DM
DM
#20
Alum
Painted
chrome
---------------------------
Part # Size Appx. Wt.Bolt Pattern Backspace Offset Max Load
958421 15X8 22 5-4.5 3.65” -21mm 2,100
958411 15X8 22 6-5.5 3.65” -21mm 2,100
950421 15X10 27 5-4.5 3.65” -47mm 2,100
950401 15X10 27 5-5.5 3.65” -47mm 2,100
950411 15X10 27 6-5.5 3.65” -47mm 2,100
968421 16X8 23 5-4.5 4.03” -12mm 2,500
968412* 16X8 23 6-5.5 4.03” -12mm 2,500
968482 16X8 24 8-6.5 4.03” -12mm 3,400
960412* 16X10 27 6-5.5 4.52” -25mm 2,500
960170 16X10 29 8-170 4.52” -25mm 3,400
960481 16X10 29 8-6.5 4.52” -25mm 3,400
979402 17X9 27 5-5.5 4.53” -12mm 2,500
979412* 17X9 27 6-5.5 4.53” -12mm 2,500
979170 17X9 28 8-170 4.53” -12mm 3,400
979481 17X9 28 8-6.5 4.53” -12mm 3,400
The following users liked this post:
2141pete (06-28-2007)