i bought the nitrous express dual stage nitrous kit with the progresive controler it dosent have any wire diagrams in it and the online bookelt of the wire diagrams on my truck are wrong has any body installed this kit on an 03 dodge or can you tell me what wire to get a tach reading and what tps wire to tap to get the wide open throtte signal from thanks

 

You get the tach reading by taping into an injector wire.....So says NX.
Personally, I just wouldn't mess what is arguably the most important wire on the truck.

I have have found the simplest and most consistent method is to activate the first stage using boost reference and the second stage time referenced. Every setup will vary, but I time delay the second stage to activate just after the 60 foot (every setup will vary here).

Use your 60 and 330 foot as a tuning aid....Work up the quantity and ramps slowly while watching your slips.

I don't recall the TPS wire...I found it on the web, but can't find the web site.

 

ya im not going to tap a injector wire i know you can but i feel the same way. what i realy dont undestand is i have a manual tranny and if i use the time delay and let off the go go pedal to shift will it kick back in once i get back in it? thats why i had planed on useing the boost referance and the only reason for useing the rpm is so it didnt over rev so i can hit my shifts just a bit easier

 

I would think boost referenced would be the only way to go with a stick.