View Poll Results: Was it worth it
yes it was a steal
5
50.00%
W.T.F were you thinking
1
10.00%
looks like a good project
4
40.00%
Voters: 10. You may not vote on this poll
finally joined the first gen crowd
#1
#2
Can't go wrong at that price.
Since you are basically starting from scratch on the rear, I would look at some custom spring mount/hangars. The reason being, 1st Gen stock springs are not known for for their good ride quality, which is due mostly to the shorter length leafs they used. I would consider fabbing in some mounts to fit leaves at least a couple inches longer.
Since you are basically starting from scratch on the rear, I would look at some custom spring mount/hangars. The reason being, 1st Gen stock springs are not known for for their good ride quality, which is due mostly to the shorter length leafs they used. I would consider fabbing in some mounts to fit leaves at least a couple inches longer.
#5
#7
#9
Well I finally got to tearing her apart lately here some pics. I also opened up the rear end and found what I think is a brand new set up in there.
I have been kicking some ideas around that may take this away from being a normal first gen rebuild. Let's just say she may be running a little different gwvr if my plans work out
I have been kicking some ideas around that may take this away from being a normal first gen rebuild. Let's just say she may be running a little different gwvr if my plans work out
Last edited by rednekroper05; 03-18-2012 at 10:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Cdog121
1st Generation Dodge Cummins 89-93
6
11-16-2015 01:49 PM
CGwill
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
01-26-2015 02:10 AM