That is sweet

 

very nice..

 

having an intake milled off a head like that by a competent machine shop is not "inexpensive" and I have a head that HAS been ported on the intake side that still has the stock intake setup on it, so it doesn't have to be done to port a head, it does make it easier but not necessary. Does the $2000 include the milling of the head and drilling and tapping of the holes to bolt the intake to the head? Does this price also include the custom injection lines that will be required for this setup to be ran on a 12v truck?

 

I will mill the side off your head and drill and tap for $150.00 I will have to think about the lines but if I had to guess somewhere between 500-600 I will get back to you when I know for sure

 

IMO all that should be included in the price of the intake since it is required for that intake to work.

 

I did not include it because many people do not need the work on the head because they are either having another shop working on the head, or they have access to a local machine shop that can do the work, also some guys can bend there own lines. Everyone has some sort of different requirements. It is hard to make something like that one size fits all some guys will require front entrance for the plenum and some will need it to enter the rear, also hood clearance and cowel clearance will be a issue. So I will have to make adjustments depending on what the customers individual needs are.

 

that looks sweet could you do one for a 3.9 4bt

 

Sure anyone else interested it would help with pricing one off peices are very time consuming.