My Cummins
#1
My Cummins
Well to me. This is my second truck. Im 16 and bought this truck for $1900. I original bought a 1975 GMC Seirra K-15 4x4 for $850 last year and that was going to be my DD, but started building it up over summer and went to big and can't afford to drive it DD, so its a mud truck now, sence I got the cummins.
Here's the only picture's I have right now:
Here's the plans:
New front rotors/hubs/pads
Work on rear drum brakes
Bleed brakes
New fuel filter
Change oil/oil filter
Sand down and paint
New tires/wheels
-Guague piller(Gauge Works Dual Gauge Pod)
-4" Exhuast(Rapid Flow Single Exhaust System)
-Cold air intake(PDR Diesel Performance: ASA Modifieds 1st Gen Dodge Cold Air Intake System 1989-93 only /w aFe Filter)
-60HP Injectors(not for awhile)(Scheid Diesel - 89-93 Dodge Injector 60HP Increase Injectors Scheid Diesel Ram 2500 - 3500)
-Fuel pin
-3200 Spring
Oh and some turns on the fuel screw(heard that adds some power)
Just looking for alittle more performance/towing and some black smoke
Here's the mud truck the deisel will tow
Tractor tires to come!
What's done so far:
Oil change/oil filter
New front rotors, pads, upper ball joints and bushing's on drivers side
Replaced tranny hose for 2nd tranny cooler with havy duty hydrulic hose
fixed leak on right rear tire
put TSC tool box in
To come in next week or 2
-double gauge pillar
(Auto Meter 15198 - Auto Meter Pillar Gauge Pods)
-0-1600 EG gauge (Dynomite Diesel - 0-1600 Degree White Face EGT Gauge Gauges Danin ALL UNIVERSAL)
-0-60lb boost gauge (Dynomite Diesel - 0-60lb White Face Boost Gauge Gauges Danin ALL UNIVERSAL)
-upgrade H1 compressor housing and 60mm wheel (Upgrade Compressor Housing & Wheel combo (60mm inducer) for 1991.5-1994 Turbochargers)
4" straight pipe
Here's the only picture's I have right now:
Here's the plans:
New front rotors/hubs/pads
Work on rear drum brakes
Bleed brakes
New fuel filter
Change oil/oil filter
Sand down and paint
New tires/wheels
-Guague piller(Gauge Works Dual Gauge Pod)
-4" Exhuast(Rapid Flow Single Exhaust System)
-Cold air intake(PDR Diesel Performance: ASA Modifieds 1st Gen Dodge Cold Air Intake System 1989-93 only /w aFe Filter)
-60HP Injectors(not for awhile)(Scheid Diesel - 89-93 Dodge Injector 60HP Increase Injectors Scheid Diesel Ram 2500 - 3500)
-Fuel pin
-3200 Spring
Oh and some turns on the fuel screw(heard that adds some power)
Just looking for alittle more performance/towing and some black smoke
Here's the mud truck the deisel will tow
Tractor tires to come!
What's done so far:
Oil change/oil filter
New front rotors, pads, upper ball joints and bushing's on drivers side
Replaced tranny hose for 2nd tranny cooler with havy duty hydrulic hose
fixed leak on right rear tire
put TSC tool box in
To come in next week or 2
-double gauge pillar
(Auto Meter 15198 - Auto Meter Pillar Gauge Pods)
-0-1600 EG gauge (Dynomite Diesel - 0-1600 Degree White Face EGT Gauge Gauges Danin ALL UNIVERSAL)
-0-60lb boost gauge (Dynomite Diesel - 0-60lb White Face Boost Gauge Gauges Danin ALL UNIVERSAL)
-upgrade H1 compressor housing and 60mm wheel (Upgrade Compressor Housing & Wheel combo (60mm inducer) for 1991.5-1994 Turbochargers)
4" straight pipe
#5
Thanks
---AutoMerged DoublePost---
---AutoMerged DoublePost---
Thanks hopefully by this summer/summer she'll be looking good with some good power.
Last edited by Bad93Cummins; 04-30-2009 at 02:05 PM. Reason: Automerged Doublepost
#10