Tell me what you think of it.
#1
#4
#5
I actually used the Duplicolor with Kevlar hit from Autozone which cost me about 80$. It's a roll on spray that is nice because there is now over spray. And my tips would be buy some 36 grit sand paper to prepare the surface with, that scuff pad in the kit does not do the best job of that. Also when you mask it off make sure you have good tape or at least use two layers of tape. Just be careful removing it, first time I did mine the bed liner came up with it. I ended up cutting the line at the bottom of the tape with a razor blade. I also used a 3M black pin stripe on the top edge of the liner for a more finished look.
If you need more help feel free to ask!
If you need more help feel free to ask!
The following users liked this post:
tiremann9669 (02-25-2013)
#6
Just got done rhino lining the Bumpers and rocker panels. Which I think looks mean as hell. But I'm curious as to what everyone thinks of it and if I should black it out or go for a mix of chrome and black.
Attachment 27224
Attachment 27224
Sharp just like it sits.