Shade Tree , Pro-Mechanics & Fabrication Discussion of Fabrication of various products form your diesel as well as welders, Power Tools , Hand Tools , Shops, Garages , Lifts And More Including Tips and Tricks

Power Steering Flush, Do It Yourself

Thread Tools
 
Search this Thread
 
  #1  
Old 02-02-2008, 04:24 PM
RSWORDS's Avatar
BOMBARDIER

Thread Starter
Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
Default

AWESOME WRITE UP!!!!

Can you tell a differance? Was it acting up or justa preventative matainance thing?
 
  #2  
Old 02-02-2008, 04:38 PM
wildbill's Avatar
BOMBARDIER

Join Date: Jul 2007
Location: Billlings, MT
Posts: 12,808
Received 667 Likes on 553 Posts
Default

Preventive maintenance. Seemed a little bit smoother afterwards.
 
  #3  
Old 02-27-2008, 07:48 AM
asimpson's Avatar
Newbie
Join Date: Sep 2007
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I did all that. However, I am still having problems. Not sure if it is the power steering pump, or the steering gear box. Basically my problem is when I am driving straight down the road the wheel becomes tight. When I am turning at lower speeds, seems to be fine. I had a helper in the truck turning the wheel and while under the truck noticed the fluid going into the cooler seemed to come in bursts, or pulsate. I don't think there is any air in there, but I could be wrong. At least there are no air bubbles in the reservoir. Anyone know whats going on, or experience this before?
 
  #4  
Old 02-27-2008, 07:27 PM
wildbill's Avatar
BOMBARDIER

Join Date: Jul 2007
Location: Billlings, MT
Posts: 12,808
Received 667 Likes on 553 Posts
Default

How old a pump we got? Could be failing.
 
  #5  
Old 02-27-2008, 07:50 PM
asimpson's Avatar
Newbie
Join Date: Sep 2007
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I just replaced the pump. Still having the problem. Wondering if it could be an alignment issue? Either that or the hydraulic brake booster, or the power steering gear box.
 
  #6  
Old 02-27-2008, 07:59 PM
wildbill's Avatar
BOMBARDIER

Join Date: Jul 2007
Location: Billlings, MT
Posts: 12,808
Received 667 Likes on 553 Posts
Default

Never had a wheel get tight from being misaligned. Very well could be the steering box. How do the brakes work? Act like no power steering ate all?
 
  #7  
Old 02-28-2008, 09:49 AM
1Tondiesel's Avatar
Diesel Fan
Join Date: Feb 2008
Location: SoCal
Posts: 80
Received 4 Likes on 2 Posts
Default

I replaced my steering box (04 Ram) and the one I got from the parts store was bad from the get go. Finally ponied up the money and bought another from the dealer. The nice thing about the dealers is it comes with the reservoir attached so you don't have to mess with swapping it over to the new unit.
 
  #8  
Old 03-19-2009, 01:47 PM
dbowlds's Avatar
Newbie
Join Date: Mar 2009
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

When you are flushing the fluid while pouring in new do you need to move the steering wheel back and forth to circulate the new fluid through the power steering rack? I'm assuming you also have the motor idling while doing this so the pump is being driven. Want to switch to Amsoil synthetic ATF for fluid. Have heard good things about it. Dealer wanted over $100 to flush power steering fluid. Sounds like a pretty easy job to do yourself. 2007 dodge 2500 5.9 Cummins, banks 6 gun power pack, bypass oil filtration Kore 3" life RBP wheels 35" Toyo MT's
 
  #9  
Old 03-19-2009, 03:25 PM
GRI's Avatar
GRI
GRI is offline
Diesel Bomber
Join Date: Mar 2007
Location: Mother Nature, New
Posts: 2,958
Received 135 Likes on 111 Posts
Default

Originally Posted by 1Tondiesel
I replaced my steering box (04 Ram) and the one I got from the parts store was bad from the get go. Finally ponied up the money and bought another from the dealer. The nice thing about the dealers is it comes with the reservoir attached so you don't have to mess with swapping it over to the new unit.
Last I knew the pump had the resevoir attached?
 
  #10  
Old 04-13-2009, 09:21 PM
oglejust's Avatar
Diesel Wrench
Join Date: Oct 2008
Location: paris illinois
Posts: 556
Received 19 Likes on 19 Posts
Default

Originally Posted by dbowlds
When you are flushing the fluid while pouring in new do you need to move the steering wheel back and forth to circulate the new fluid through the power steering rack? I'm assuming you also have the motor idling while doing this so the pump is being driven. Want to switch to Amsoil synthetic ATF for fluid. Have heard good things about it. Dealer wanted over $100 to flush power steering fluid. Sounds like a pretty easy job to do yourself. 2007 dodge 2500 5.9 Cummins, banks 6 gun power pack, bypass oil filtration Kore 3" life RBP wheels 35" Toyo MT's
see anything wrong w/ this?

---AutoMerged DoublePost---

Originally Posted by asimpson
I did all that. However, I am still having problems. Not sure if it is the power steering pump, or the steering gear box. Basically my problem is when I am driving straight down the road the wheel becomes tight. When I am turning at lower speeds, seems to be fine. I had a helper in the truck turning the wheel and while under the truck noticed the fluid going into the cooler seemed to come in bursts, or pulsate. I don't think there is any air in there, but I could be wrong. At least there are no air bubbles in the reservoir. Anyone know whats going on, or experience this before?
sounds like maybe your not getting enuff vacuum
 

Last edited by oglejust; 04-13-2009 at 09:21 PM. Reason: Automerged Doublepost


Quick Reply: Power Steering Flush, Do It Yourself



All times are GMT -5. The time now is 03:50 AM.