Heres some bumpers I have made

base bumper


Same base with bull bar and painted.


Another one i built, only pic i took of it before i sold it.

 

That one with the bull bar is pretty nice. Good work.

 

the worlds first ranchhand/fabfor bumper for my 98 ......unfinished thou, so no pics, my uh business associate and i are in a disagreement on the winch mount...

 

custom guage mounts in dash bezel, homemade shift ****. I'll be modifing the stick again for the jake switch.


shaved and powdercoated valve cover and intake


there's also a hood ornament, but no pic of it.

 

built some wood siderails

 

Swing away bed mounted shop crane.
Receiver hitch reinforcement bars.
Tow hook mounted push bar for starting the race car.

 

Front/rear bumpers, aluminum dump-flatbed and 6061 diff cover.
Oh, ashtray-delete switch mount and diamond plate half-fenders.
Keep in mind that I don't have $&*t for tools or money.
This truck is never clean, it is a working rig.

 

I ran a 4" galvanized flex pipe from the bottom of my airbox to the foglight hole in the bumper but then ended up taking it out so i could reinstall my foglight and just ran the flex into the wheelwell.

---AutoMerged DoublePost---

I cut off my exhaust from the front of the cat to the tip. I was trying to get good sounding exhaust as cheap as possible. so i hollowed out the cat, cut a rectangle out of the top of the muffler and gutted in then welded the rectangular plate back in place. welded my exhaust back in place. started it up. sounded no different than before. some of my friends actually said it was quieter than before. apparently the sound dampens itself in the cat and muffler even when they are hollow. it's all good tho cause i've got 6"x48" bullhaulers now that sound great.

 

Here is a bumper I just finished up building for a friend.

 

3/16 wall removable step bars. No pics of powdercoating and installation. Brackets welded to frame rails.

And just for fun, a pic of my soon to be 400-450 pony first gen motor