Custom Items You've Built For Your Truck
#102
#105
It's not much, but I made this CB mount for my '02 F-350 with the 40-20-40 split bench front seat. It bolts to the support structure for the -20- part of the seat and the CB mounts to it with velcro. The speaker is blocked so I pretty much have to use an external speaker but it holds my radio in a convenient place to catch crumbs and spilled coffee (and for me to work the controls...).
The following users liked this post:
stnemason (08-21-2010)
#107
#108
#109
Replaced my Ram head emblem with a Cummins logo
---AutoMerged DoublePost---
Has anyone bought the chrome "Cummins Turbo Diesel" letter sets from Geno's. I haven't had a chance to put them on yet and was wondering if anyone had any methods that work for spacing and templates.
Last edited by 01CumminsRam; 01-17-2009 at 07:07 AM. Reason: Automerged Doublepost
#110
Well here is my list the first thing I made was 1" longer control arms to center the axle in wheel well opening .
Then I made traction bars for it
drive shaft loops for the rear drive shaft.
Then I made my own shock tower mounts for the front so I can run the same shocks in the front that I run in the back.
I also heim jointed the front sway bar
I also made my own 3rd gen track bar conversion bracket and made my own 3rd gen track bar
Then I made traction bars for it
drive shaft loops for the rear drive shaft.
Then I made my own shock tower mounts for the front so I can run the same shocks in the front that I run in the back.
I also heim jointed the front sway bar
I also made my own 3rd gen track bar conversion bracket and made my own 3rd gen track bar