Battery Relocation
#3
#4
#5
#6
stock bed back on right now. eventually it's getting a flat bed and i'll put them in the front tool box. i believe they are 4D's, with 1800CA and 11500 CCA each. yeah i got some juice in there! that was the only place under the body i could put them due to the size. total cost in batterries, iron for the boxes, cable, etc., i have about $1,000 in it. let me get some bed on pictures up. the only down side is i have to pull the bed to get to them so i put in a disconnect.
#7
#9
#10
i did. i put some 3M rubberized underbody coating on them. talking to the guys at the shop and down at the parts house they recomended 1 ga. if i have problems with burnt terminals then i gues i'll upgrade to 1/0. also, do you know if they make a power block sorta thing? where i have my main power coming in, then have a post going to the starter, another for the post going to the cellinoid on the fender, another for jumper cables? i've looked thru the DEKA and STANDARD book and they make something similar just way to small.