Shade Tree , Pro-Mechanics & Fabrication Discussion of Fabrication of various products form your diesel as well as welders, Power Tools , Hand Tools , Shops, Garages , Lifts And More Including Tips and Tricks

Puttin Up Pole Barn.

Thread Tools
 
Search this Thread
 
  #21  
Old 03-01-2008, 08:05 AM
Whit's Avatar
Site Mascot
Join Date: Mar 2007
Location: Why-homing
Posts: 16,010
Received 940 Likes on 701 Posts
Default

Yes do cut control joints into the finished concrete..........24 hrs after the pour works best...........3/4" deep is what I do to

you will want the control joints running the same as yer poles............mine are every 8 foot.............its gaurenteed the crete will crack all the way across from pole to pole so ya may as well cut in the control joints................you wait longer than 24 hours and if it cures to fast then the cracks will already be there

24x 40 shop I would do that in 2 pours of 12 x40 then cut the joints in every 8 foot

if yer dead set on doing the wire mesh then I would recommend going to the fibermesh added to the crete.........they make some that works well for a smooth finish surface but you hafta request it otherwise you will get the regular fibermesh and it will make a mess of yer finish job..............will look like someone threw an antilope hide in the mix
 
  #22  
Old 03-01-2008, 11:19 AM
LOGANSTANFORTH's Avatar
Diesel Bomber
Join Date: Aug 2007
Location: TIKRIT, IRAQ
Posts: 6,157
Received 371 Likes on 264 Posts
Default

Originally Posted by jstange2
Like I said before, I'm not an electrician, but you might be able to trench power to the pole barn with a switch box and run the house as a sub panel so you can still run a generator. Any electricians want to chime in?

Josh
yes you can do that, only if you kill the power from the house with a main breaker when the shop is under its normal power, and when you start the generator, kill the main switch for the barn and turn the house lines main breaker on......
 
  #23  
Old 03-01-2008, 12:55 PM
JON's Avatar
JON
JON is offline
Member
Join Date: Mar 2007
Location: Mankato MN
Posts: 1,308
Received 56 Likes on 48 Posts
Default One more thing

I dont know how it is where you live but where i'm from "minnesota" the concrete floors sweat REALLY bad in the summer due to humidity. When you get your forms up and the base ready, before you put your rebar down cover the entire surface area with poly sheeting. I have on every floor i've ever poured including my mom and dads new house. It will keep the floor dry as a bone when its humid out.
 
  #24  
Old 03-01-2008, 01:30 PM
jstange2's Avatar
Diesel Wrench
Join Date: Dec 2007
Location: South Dakota
Posts: 820
Received 29 Likes on 25 Posts
Default

Originally Posted by STROKETECH
I dont know how it is where you live but where i'm from "minnesota" the concrete floors sweat REALLY bad in the summer due to humidity. When you get your forms up and the base ready, before you put your rebar down cover the entire surface area with poly sheeting. I have on every floor i've ever poured including my mom and dads new house. It will keep the floor dry as a bone when its humid out.
That's a very good point. I never thought of that for anything other that basement floors. I know some of the shady concrete guys around here try to get away without it in basements so they don't have to wait as long to finish it.

Josh
 
  #25  
Old 03-01-2008, 09:12 PM
I-6DZL's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2007
Posts: 83
Received 2 Likes on 2 Posts
Default

Originally Posted by STROKETECH
I dont know how it is where you live but where i'm from "minnesota" the concrete floors sweat REALLY bad in the summer due to humidity. When you get your forms up and the base ready, before you put your rebar down cover the entire surface area with poly sheeting. I have on every floor i've ever poured including my mom and dads new house. It will keep the floor dry as a bone when its humid out.
Thanks for the reminder. We done the exact same thing on my inlaws barn. Works great!!!

---AutoMerged DoublePost---

Originally Posted by IC Smoke
yep pour the slab and the next day or so I can come by with the saw and we'll run a few chalk lines and cut it, we stick the blade down 3/4" As far as wire mesh I would do it. thats a heck of a deal on the barn!!!!!
Yea i got a heck of a deal, and it pretty much kicked my rear. Really cold, snowy, rainy, it sucked, but i got over it!
 

Last edited by I-6DZL; 03-01-2008 at 09:12 PM. Reason: Automerged Doublepost
  #26  
Old 03-03-2008, 01:42 PM
jstange2's Avatar
Diesel Wrench
Join Date: Dec 2007
Location: South Dakota
Posts: 820
Received 29 Likes on 25 Posts
Default

When are you starting it? Keep us posted.

Josh
 
  #27  
Old 03-04-2008, 10:54 AM
I-6DZL's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2007
Posts: 83
Received 2 Likes on 2 Posts
Default

Originally Posted by jstange2
When are you starting it? Keep us posted.

Josh
At this point i have to wait 'til the weather breaks. Expecting 2-8" of snow tonight, bummer. We're still up in the air as to wether we want to stay here or move anyhow. I posted this to get different idea's and such.

I will definately keep everyone posted.

Thanks for the support guys!

Curtis
 




All times are GMT -5. The time now is 09:40 PM.