NEW: SC GMAX Parts/1055/Mag-Hytec
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2008
Posts: 127
Likes: 23
NEW: SC GMAX Parts/1055/Mag-Hytec
Bought parts the convert my SC IV to a GMAX a little while back but never did. I am now returning truck to stock and returning the transmission to stock as well.
Have GMAX C2,C3,C4 clutch packs with necessary backing plates, pistons etc. I did not get the C1 stuff at the time i believe because IIRC they were the same but i cannot remember. These parts are all new.
$700 Shipped OBO.
I can also include my (used for around 10,000 miles) pump, c2 piston, and valvebody which have the transgo mods completed , as well as the C1 backing plate and gaskets for a package price of $850 Shipped. This would give you a nearly complete GMAX package providing the C1 plates are the same you would just need a C1 clutch pack which is less than $150.
I also have a Mag-Hytec Pan that I polished the fins on that i will include to make it an Even $1000 shipped.
I also have my 1055 Torque converter for sale in a seperate thread. It was used for around 10,000 miles as well. If you wanted to buy it and everything above except the transmission pan i would do it for a package deal of $1,800 subtract that down to $1,600 if you exchange me your good used stock one. Add $150 for the pan to be included.
With your purchase of a C1 power pack seperatley, this is a $3,150 kit for $1,800 which would be all new and fresh except for the converter, valvebody and pump.
PM Me for separate prices on the parts.
I can snap pictures if desired.
Thank you.
Have GMAX C2,C3,C4 clutch packs with necessary backing plates, pistons etc. I did not get the C1 stuff at the time i believe because IIRC they were the same but i cannot remember. These parts are all new.
$700 Shipped OBO.
I can also include my (used for around 10,000 miles) pump, c2 piston, and valvebody which have the transgo mods completed , as well as the C1 backing plate and gaskets for a package price of $850 Shipped. This would give you a nearly complete GMAX package providing the C1 plates are the same you would just need a C1 clutch pack which is less than $150.
I also have a Mag-Hytec Pan that I polished the fins on that i will include to make it an Even $1000 shipped.
I also have my 1055 Torque converter for sale in a seperate thread. It was used for around 10,000 miles as well. If you wanted to buy it and everything above except the transmission pan i would do it for a package deal of $1,800 subtract that down to $1,600 if you exchange me your good used stock one. Add $150 for the pan to be included.
With your purchase of a C1 power pack seperatley, this is a $3,150 kit for $1,800 which would be all new and fresh except for the converter, valvebody and pump.
PM Me for separate prices on the parts.
I can snap pictures if desired.
Thank you.
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2008
Posts: 127
Likes: 23
Forgot to mention if i did send you valvebody and pump I would need yours in return. Or I can just remove the valves, otherwise I will just leave it all alone.
$650 shipped for frictions steels and backing plates. If you really want the valves, add another $100 if you send me your stock ones back, anything less and it isnt worth my time to mess with them.
Gaskets included if you need them.
Converter itself $900 OBO shipped. Do not want/need a stock one anymore in return.
Package deal for everything above $1,600 shipped. Throw in the pan for an extra $100.
Pan alone $150 shipped.
---AutoMerged DoublePost---
pan is sold
$650 shipped for frictions steels and backing plates. If you really want the valves, add another $100 if you send me your stock ones back, anything less and it isnt worth my time to mess with them.
Gaskets included if you need them.
Converter itself $900 OBO shipped. Do not want/need a stock one anymore in return.
Package deal for everything above $1,600 shipped. Throw in the pan for an extra $100.
Pan alone $150 shipped.
---AutoMerged DoublePost---
pan is sold
Last edited by durallymax; Jan 12, 2012 at 07:59 AM. Reason: Automerged Doublepost
