Industrial Injection phatshaft 62/70 03+ Ford 6.0
#1
Industrial Injection phatshaft 62/70 03+ Ford 6.0
Alright guys ive got a used phat shaft 62/70 that i picked up just because it was a good deal. I wanted to adapt it to my dodge but after alot of research figured it would be to much work and i just want to sell it and get something for my application.
Im not a ford guy by any means but looked on here and saw these things going for 1600 plus..
Im asking 1500 for it seeing how it was made in 9/09.
The shaft has minimal side to side play and NO end play. The blades have a few nics but nothing major. Im putting up pics in the post below. I am also including the Pedistal mount as well.
P.M me if you have any questions or want to work out some kind of deal.
Located in Spring, Texas 77379
---AutoMerged DoublePost---
Im not a ford guy by any means but looked on here and saw these things going for 1600 plus..
Im asking 1500 for it seeing how it was made in 9/09.
The shaft has minimal side to side play and NO end play. The blades have a few nics but nothing major. Im putting up pics in the post below. I am also including the Pedistal mount as well.
P.M me if you have any questions or want to work out some kind of deal.
Located in Spring, Texas 77379
---AutoMerged DoublePost---
Last edited by D-LUX; 08-14-2011 at 06:07 PM. Reason: Automerged Doublepost
#9
alot .. the only part that will "bolt up" is the exhaust flange it self..
the charge side of the turbo will require some custom tubing to the intercooler.
the housing will need to be clocked, no big deal just work.
the exhaust side is a bit more difficult, the downpipe required is a ford style flange. So basically a custom downpipe all together
the charge side of the turbo will require some custom tubing to the intercooler.
the housing will need to be clocked, no big deal just work.
the exhaust side is a bit more difficult, the downpipe required is a ford style flange. So basically a custom downpipe all together