1995 F250 EC/LB 4x4
#11
Send me a PM with your email address and I can get you some more pictures..
#13
#16
XLT model - Power windows, locks, mirrors
Rebuilt Automatic Transmission
231k miles
Triple Pillar gauge pod with autometer gauges - Trans temp, boost, EGT
Dual 4" exhaust with 3" downpipe
Tymar Air intake
Full Force Stage 1's
Tony Wildman 6 Pos chip
Rhino Lined bed
Smittybuilt brush guard
4" Skyjacker lift kit on 315/75/16 BFG KM2's
Aftermarket cd player
Recent replaced items include: Starter, Motorcraft glow plugs, Stancor glow plug relay, gear selector arm, and Thermostat/sender.
The bad: Two Dents in the back of the cab corners above the box where the previous owner's canopy slid forward, Nothing major.
I have all the paperwork for this truck including the original window sticker. Truck runs great, starts great, shifts great. All around a good truck.
Will do 7500 as it sits or I will sell it without injectors, dual exhaust, and chip for 6500, but will come with a single 4" over the axle and stock injectors...
Here is the most recent picture of it...
Rebuilt Automatic Transmission
231k miles
Triple Pillar gauge pod with autometer gauges - Trans temp, boost, EGT
Dual 4" exhaust with 3" downpipe
Tymar Air intake
Full Force Stage 1's
Tony Wildman 6 Pos chip
Rhino Lined bed
Smittybuilt brush guard
4" Skyjacker lift kit on 315/75/16 BFG KM2's
Aftermarket cd player
Recent replaced items include: Starter, Motorcraft glow plugs, Stancor glow plug relay, gear selector arm, and Thermostat/sender.
The bad: Two Dents in the back of the cab corners above the box where the previous owner's canopy slid forward, Nothing major.
I have all the paperwork for this truck including the original window sticker. Truck runs great, starts great, shifts great. All around a good truck.
Will do 7500 as it sits or I will sell it without injectors, dual exhaust, and chip for 6500, but will come with a single 4" over the axle and stock injectors...
Here is the most recent picture of it...
Last edited by 95powersmoker; 10-14-2011 at 03:38 PM.
#20
How is everything else on the truck? Suspension/Steering wise? (ball joints, tie rods, etc.)
I am a student over here at EWU looking for a turn key reliable rig for towing my boat around the NW.
Thanks, Nick
I am a student over here at EWU looking for a turn key reliable rig for towing my boat around the NW.
Thanks, Nick